How to maintain the seeder?

Now, in this fast-moving modern age, it often doesn't fit the pace of the times. Modern agricultural production is the most effective example of modern development. From the advanced design and advanced concept of the planter, it reflects the modern development and changes. Now, we introduce the maintenance and maintenance of the planter vividly and vividly.

(1) Before the seeder works, oil should be filled in time at each oil filling point to ensure that the moving parts are fully lubricated. Lost or damaged parts should be replenished, replaced and repaired in time. Be careful not to oil the gears and chain as it will stick to the mud and increase wear.

(2) The working length of each metering wheel is equal and the displacement is the same. The seeding rate adjustment mechanism of the planter is flexible and must not have sliding and empty movements.

(3) The disc of the disc opener rotates flexibly, do not shake or rub the main body of the disc opener.

(4) Before and after each shift, and during work, the soil in all parts of the planter should be cleaned, and special attention should be paid to removing the soil and grease on the transmission system.

(5) After each shift, the fertilizer in the fertilizer box of the planter should be cleaned to prevent the fertilizer from corroding the fertilizer box and the location of the fertilizer. Check that the seeding and fertilizer shafts rotate freely.

(6) After each shift, the planter should be parked in a dry covered shed. Cover the seed fertilizer box tightly when in an open parking lot. When parking, lower the opener, lower the support frame that supports the machine body, and reduce unnecessary load on the planter frame.