ariens jet rotary tiller

Classification of Rotary Cultivator Tiller
Horizontal axis Rotary Tiller
Strong soil crushing ability, the soil can be finely crushed in one operation, the soil and fertilizer can be mixed evenly, and the ground can be leveled, which can meet the requirements of dry land sowing or paddy field planting, which is conducive to increasing agricultural production time, improving work efficiency, and making full use of the power of the tractor. However, stubble cover and weeding ability are poor, and the cultivation depth is shallow (dry farming 12-16 cm, hydroponics 14-18 cm), and energy consumption is high. It is mainly used in rice fields and vegetable fields, and can also be used in orchard cultivation. The heavy-duty horizontal-axis rotary tiller has a plowing depth of 20-25 cm, and is mostly used for the cultivation of shrubs, swamps and grassy wastelands. The working parts include a rotary tiller roller and a number of soil cutting blades evenly arranged in a multi-head spiral, driven by the power output shaft of the tractor through a transmission device, and the common speed is 190-280 rpm. The rotation direction of the cutter roller is usually the same as that of the tractor wheel same. The soil cutting blade cuts the soil layer from front to back, and throws the soil block back and up to the casing and tray for further crushing. When the knife roller is cutting and throwing soil, the soil reaction force on the knife roller helps to push the unit forward, so the traction required by the horizontal rotary tiller is very small, and sometimes the unit can even be pushed forward by the knife roller. Soil cutting blades can be divided into chisel knives, machetes, right-angle knives and arc knives. The front end of the chisel is narrow, the ability to penetrate into the soil is strong, and the energy consumption is low, but it is easy to entangle grass, so it is mostly used in vegetable gardens and courtyards with few weeds. The curved edge of the machete has a sliding cutting effect, which can easily cut off the grass roots without wrapping the grass, and is suitable for paddy field farming. The right-angle knife has a vertical and horizontal edge, a wide blade, good rigidity, and is easy to manufacture, but its soil penetration performance is poor. The arc knife has high strength, good rigidity, and good sliding cutting effect, and is usually used on heavy-duty rotary tillers. When matching with tractors below 15kW, universal joint transmission is generally not required for direct connection; when matching with tractors above 15kW, three-point suspension and universal joint transmission are used; heavy-duty rotary tillers generally use traction. The depth of tillage is controlled and adjusted by the pallet or depth limiter. The trolley is set at the back of the cutter roller, and at the same time it plays the role of breaking the ground; the depth-limiting wheel is arranged in front of the cutter roller. There are two kinds of side drive and middle drive for the cutter roller final drive device. Side drive is mostly used for eccentric rotary tillers with small tillage width. The central drive is used for rotary tillers with larger tillage width. The machine has good symmetry and forces are evenly distributed throughout; however, the area under the transmission box lacks tillage due to the inaccessibility of the soil cutter blades. Install.

Vertical axis Gear Drive Harrow
    The working part is a rotary tiller equipped with 2 to 3 spiral knives. During operation, the rotary tiller rotates around the vertical axis, and the cutter head chops the soil. It is suitable for hydroponics in paddy fields. It has strong soil-breaking and beating effect, but poor coverage. Japan uses more.
    In order to improve the farming effect of Farmland Rotary Tille, various additional devices are installed on the rotary tiller in some countries. For example, install a nail-toothed harrow at the rear of the rotary tiller to enhance the effect of crushing soil, and install a soil loosening shovel to deepen the plowing layer.

QUICK COUPLER (3-point, set coupler)

The set action coupler which hitches at the three point on lower and top links is standard equipment.
It is simpler and more convenient than making the three point connections separrately or having the two point lower links only.
Even when the tractor and drive harrow are inclined in opposite directions, positive hitching is possible because coupler insertion is upward.

LEVELLING

Raking by the popular  drive harrow has been further improved and all improvements are embodied in the HR, HL series harrows.

HANDY WIRE CONTROLLER

The extending and retracthing of the extension rake, which removes traces of 'joints' between areas worked, is controlled from the tractor with this wire.
This wire remote control device is very useful when puddling at the border (levee) of a paddy field and when transporting.

SWING RUBBER (Special strong rubber)

Only possible by using rubber. Thanks to this rubber connection, a perfectly level finish is obtained with the levelling board even where the tractor sways from side to side on paddies or where there are plow furrows in dry fields. This 'swing rubber' connection is the result of cooperation in research and development between and a specialist maker of rubber products. The equipment ensures a good finish on stony fields and where raking is difficult.